Alloy Description
JLC Mang (CuNi4 Mn11 Alloy): A Copper-Nickel-Manganese alloy. Used in precision electrical measuring apparatus, resistors and shunts.
JLC Electromet
| JLC Electromet | |
|
| ||
JLC Mang: A Copper-Nickel-Manganese AlloyJLC Mang (CuNi4 Mn11 Alloy): A Copper-Nickel-Manganese alloy. Used in precision electrical measuring apparatus, resistors and shunts.
JLC Mang (CuNi4 Mn11 Alloy) is supplied in the following conditions:
| Alloy | Ni% | Mn% | Cu% |
|---|---|---|---|
| Manganin | 2 - 4 | 11 - 13 | Bal. |
| Shunt | 2 - 4 | 10 - 12 | Bal. |
| Alloy | Specific Resistance (µ Ω-cm) | Density (g/cm³) | Linear Expansion Coeff. (T=20-100°C) 10-6/°C |
Temp. Coeff. Of Resistance x10-6/°C |
Specific Heat (20°C) J/Kg°C |
|---|---|---|---|---|---|
| Manganin | 43.0 | 8.41 | 18 | ±15 (15-35°C) |
397 |
| Shunt | 38.5 | 8.40 | 18 | ±15 (40-60 °C) |
397 |
Wire: 12.0 mm diameter to 0.15mm diameter.
Strip: Width 0.4-80 mm, Thickness: 0.10 and above.
Or as per specified resistance.
| Alloy | JLC Mang |
|---|---|
| Tensile strength Min-Max (N/mm²) |
290 |
| Elongation % (Approx.: Annealed) |
25 |
Note: Other Grades of nickel-copper-manganese resistance alloys are also available. Please contact us for more information.
| • Privacy Policy • Disclaimer |